Constructor Detail

• GollumDongle

  GollumDongle(Context context)

  Constructor for interfacing with a PandwaRF.

  Parameters:

  context - The calling context being used to instantiate the GollumDongle.

Method Detail

• getHandleFirmwareCC1111

   HandleFirmwareCC1111 getHandleFirmwareCC1111()

  Returns:

  0 if operation successfully completed, -1 in case of error.

• getHandleFirmwareNordic

   HandleFirmwareNordic getHandleFirmwareNordic()

  Returns:

  0 if operation successfully completed, -1 in case of error.

• getShadowCc1111BootloaderVersion

   int getShadowCc1111BootloaderVersion()

  Returns the device CC1111 bootloader version as last seen by the lib

  Returns:

  device CC1111 bootloader version

• getShadowModel

   String getShadowModel()

  Returns the device model as last seen by the lib

  Returns:

  device model

• getShadowHwRevision

   String getShadowHwRevision()

  Returns the device HW revision as last seen by the lib

  Returns:

  device HW revision

• getShadowCc1111BuildType

   String getShadowCc1111BuildType()

  Returns the device CC1111 build type as last seen by the lib

  Returns:

  device CC1111 build type

• isPandwaRfRogueCc1111

   boolean isPandwaRfRogueCc1111()

  Returns:

  true if device (CC1111) is a Rogue (Pro or Gov)

• isPandwaRfRoguePro

   boolean isPandwaRfRoguePro()

  Returns:

  true if device (Nordic) is a Rogue Pro

• isPandwaRfRogueGov

   boolean isPandwaRfRogueGov()

  Returns:

  true if device (Nordic) is a Rogue Gov

• isPandwaRfMarauderCc1111

   boolean isPandwaRfMarauderCc1111()

  Returns:

  true if device (CC1111) is a Marauder

• isPandwaRfMarauderBasic

   boolean isPandwaRfMarauderBasic()

  Returns:

  true if device (Nordic) is a Marauder Basic

• isPandwaRfMarauderStandard

   boolean isPandwaRfMarauderStandard()

  Returns:

  true if device (Nordic) is a Marauder Standard

• isPandwaRfMarauderUltimate

   boolean isPandwaRfMarauderUltimate()

  Returns:

  true if device (Nordic) is a Marauder Ultimate

• getNpiParameters

   NpiParameters getNpiParameters()

  Get the current NPI parameters

  Returns:

  current NPI parameters NpiParameters

• getGollumBle

   Sub1GHzRfBleTransceiver getGollumBle()

• getGollumUsb

   Sub1GHzRfUsbTransceiver getGollumUsb()

• getGollumTrx

   Sub1GHzRfTransceiver getGollumTrx()

• getBleManagerCallbacks

  @Nullable() GollumBleManagerCallbacks getBleManagerCallbacks()

• getUsbManagerCallbacks

  @Nullable() GollumUsbManagerCallbacks getUsbManagerCallbacks()

• getInstance

   static GollumDongle getInstance(Activity parentActivity)

  Returns a single instance of GollumDongle

  Parameters:

  parentActivity - parent activity

  Returns:

  a single instance of GollumDongle

• getInstance

   static GollumDongle getInstance(Context context)

  Returns a single instance of GollumDongle

  Parameters:

  context - Associated context

  Returns:

  a single instance of GollumDongle

• hasInstance

   static boolean hasInstance()

  Returns:

  true if an instance of GollumDongle exists

• setOfflineMode

   static void setOfflineMode(boolean mode)

  Force the lib to enter specified network mode (offline/online). Equivalent to setOfflineModeBackend + setOfflineModeAnalytics + setOfflineModeCrashReport

  Parameters:

  mode - true to enter complete offline mode, false to allow backend connection.

• searchDevice

   void searchDevice(ScannerListener scannerListener, boolean scanWithoutLocationEnabled)

  Search for any Gollum device around. Return a list of available Gollum Device.

  Parameters:

  scannerListener - callbacks to be called when new device is found or scan ends

  scanWithoutLocationEnabled - true if scan without location is enabled

• searchDevice

   void searchDevice(ScannerListener scannerListener, long scanDurationMs, boolean scanWithoutLocationEnabled)

  Search for any Gollum device around. Return a list of available Gollum Device.

  Parameters:

  scannerListener - callbacks to be called when new device is found or scan ends

  scanDurationMs - duration in ms, 0 for infinite scan (only recommended when debugging)

  scanWithoutLocationEnabled - true if scan without location is enabled

• stopSearchDevice

   void stopSearchDevice()

  Stop BLE scanning for any PandwaRF device around.

• setAlternativeDeviceNameScanList

   void setAlternativeDeviceNameScanList(ArrayList<String> list)

  Set the list of alternative device names that can advertize and must be scanned This will create a new scanner

  Only available in Rogue Gov variants

  Parameters:

  list - ArrayList of alternative device names to be scanned for

• getAlternativeDeviceNameScanList

   ArrayList<String> getAlternativeDeviceNameScanList()

  Returns the list of alternative device names that can advertize and must be scanned

  Only available in Rogue Gov variants

  Returns:

  list of alternative device names

• addAlternativeDeviceNameToScanList

   void addAlternativeDeviceNameToScanList(String name)

  Adds a device name to the list of alternative device names that can advertize and must be scanned

  Only available in Rogue Gov variants

  Parameters:

  name - BLE advertizing name to be added for scan

• removeAlternativeDeviceNameFromScanList

   Boolean removeAlternativeDeviceNameFromScanList(String name)

  Removes a device name from the list of alternative device names that can advertize and must be scanned

  Only available in Rogue Gov variants

  Parameters:

  name - BLE advertizing name to be removed for scan

  Returns:

  true if at least one name was removed from the list, false if no name was removed

• removeAllAlternativeDeviceNameFromScanList

   void removeAllAlternativeDeviceNameFromScanList()

  Removes all device names from the list of alternative device names that can advertize and must be scanned

  Only available in Rogue Gov variants

• setBleManagerAppCallbacks

   void setBleManagerAppCallbacks(GollumBleManagerCallbacks bleManagerCallbacks)

  Register for BLE callbacks

  Parameters:

  bleManagerCallbacks - BLE Callback to receive information about bluetooth notification.

• isDeviceBonded

   static boolean isDeviceBonded(String deviceAddress)

  Check if the bond state of the remote device is bonded

  Parameters:

  deviceAddress - address to check for bonding status

  Returns:

  true if device (PandwaRF or any other name) is bonded

• isDeviceBonded

   boolean isDeviceBonded()

  Returns:

  true if device (PandwaRF or else) is bonded

• bondDevice

   boolean bondDevice(BluetoothDevice bluetoothDevice)

  Start the bonding (pairing) process with the remote device.

  Parameters:

  bluetoothDevice - device to bond

  Returns:

  false on immediate error, true if bonding will begin

• bondDevice

   boolean bondDevice(String deviceAddress)

  Start the bonding (pairing) process with the remote device.

  Parameters:

  deviceAddress - device address to bond

  Returns:

  false on immediate error, true if bonding will begin

• bondDevice

   boolean bondDevice()

  Start the bonding (pairing) process with the remote device.

  Returns:

  false on immediate error, true if bonding will begin

• clearBondDevice

   boolean clearBondDevice(BluetoothDevice device)

  Clear the bonding (pairing) process with the remote device.

  Parameters:

  device - device to unbond

  Returns:

  true if clear successful

• clearBondDevice

   boolean clearBondDevice(String deviceAddress)

  Clear the bonding (pairing) process with the remote device.

  Parameters:

  deviceAddress - address of device to unbond

  Returns:

  true if clear successful

• clearBondDevice

   boolean clearBondDevice()

  Clear the bonding (pairing) process with the remote device.

  Returns:

  true if clear successful

• getBondedPandwaRfCount

   int getBondedPandwaRfCount()

  Returns the number of bonded PandwaRF

  Returns:

  number of bonded PandwaRF

• getBondedDeviceCount

   int getBondedDeviceCount(ArrayList<String> deviceList)

  Returns the number of bonded devices from the deviceList

  Parameters:

  deviceList - to be checked

  Returns:

  number of bonded devices

• setUsbManagerAppCallbacks

   void setUsbManagerAppCallbacks(GollumUsbManagerCallbacks usbManagerCallbacks)

  Register for USB callbacks

  Parameters:

  usbManagerCallbacks - : USB Callback to receive information about bluetooth notification.

• openGollumBleDevice

   void openGollumBleDevice(String deviceAddress, boolean autoConnect, boolean reconnectIfError, boolean refreshDeviceCacheBeforeConnect, boolean useTxFifoQueue, boolean hideBleAddress)

  Open a device from its address without setting the app callbacks.

  Parameters:

  deviceAddress - address of device to open.

  autoConnect - indicates whether to automatically connect to the BLE device as soon as it becomes available.

  reconnectIfError - If true, allow automatic BLE reconnection in case of BLE disconnection (GATT error, ...

  refreshDeviceCacheBeforeConnect - If true, clears the internal cache and forces a refresh of the services from the remote device.

  useTxFifoQueue - If true, enqueue all TX packets into a FIFO queue.

  hideBleAddress - If true, ble address displayed on the android notification will be hidden

• openGollumBleDevice

   void openGollumBleDevice(ExtendedBluetoothDevice device, boolean autoConnect, boolean reconnectIfError, boolean refreshDeviceCacheBeforeConnect, boolean useTxFifoQueue, boolean hideBleAddress)

  Open a device without setting the app callbacks.

  Parameters:

  device - Bluetooth device to connect to.

  autoConnect - Whether to directly connect to the remote device (false).or to automatically connect as soon as the remote device becomes available (true).

  reconnectIfError - If true, allow automatic BLE reconnection in case of BLE disconnection (GATT error, ...).

  refreshDeviceCacheBeforeConnect - If true, clears the internal cache and forces a refresh of the services from the remote device.

  useTxFifoQueue - If true, enqueue all TX packets into a FIFO queue.

  hideBleAddress - If true, ble address displayed on the android notification will be hidden

• closeDevice

   void closeDevice()

  Close PandwaRF connection

• closeGollumBleDevice

   void closeGollumBleDevice()

  Close BLE device

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

• refreshDeviceCache

   boolean refreshDeviceCache()

  Clears the internal cache and forces a refresh of the services from the remote device.

  Returns:

  true, if the internal cache refresh has been requested successfully

• setShouldSignalRssi

   void setShouldSignalRssi(boolean signalRssi)

  Enable RSSI measurement of the connected device.

  Parameters:

  signalRssi - true to enable RSSI measurements.

• setShouldSignalBattery

   void setShouldSignalBattery(boolean notifActive)

  Enable reception of the battery level notification.

  Parameters:

  notifActive - true to request PandwaRF device to send periodic battery level notification

• hasFeatureUsbHost

   static boolean hasFeatureUsbHost()

  Indicates if device has USB Host feature

  Returns:

  true if device has USB Host feature

• hasFeatureBluetoothSmart

   static boolean hasFeatureBluetoothSmart()

  Indicates if device has Bluetooth Smart feature

  Returns:

  true if device has Bluetooth Smart feature

• isUsbDeviceGollumBootloader

   static boolean isUsbDeviceGollumBootloader(UsbDevice device)

  Indicates if device is connected in USB mode and Bootloader is running

  Parameters:

  device - UsbDevice to check.

  Returns:

  true if device is connected in USB mode and Bootloader is running

• isUsbDeviceGollumFirmware

   static boolean isUsbDeviceGollumFirmware(UsbDevice device)

  Indicates if device is connected in USB mode and FW is running

  Parameters:

  device - UsbDevice to check.

  Returns:

  true if device is connected in USB mode and FW is running

• getLastVersionFirmwareCC1111

   void getLastVersionFirmwareCC1111(String modelName, String hardwareRevision, GollumCallbackGetString cb)

  Query the server for last available CC1111 FW version number for specified model/HW revision

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cb - Callback to call with result when the background task is terminated

• getLastVersionFirmwareCC1111

   void getLastVersionFirmwareCC1111(String modelName, String hardwareRevision, String currentSwVersionNordic, GollumCallbackGetString cb)

  Query the server for last available CC1111 FW version for specified model/HW revision

  Parameters:

  modelName - Model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  currentSwVersionNordic - Nordic FW version of the PandwaRF to check.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getLastVersionFirmwareCC1111

   void getLastVersionFirmwareCC1111(String modelName, String hardwareRevision, String currentSwVersionNordic, GollumCallbackGetGeneric<FirmwareCC1111> cb)

  Query the server for last available CC1111 FW version for specified model/HW revision

  Parameters:

  modelName - Model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  currentSwVersionNordic - Nordic FW version of the PandwaRF to check.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getCurrentFirmwareCC1111Id

   String getCurrentFirmwareCC1111Id()

  Returns the current CC1111 FW version

  Returns:

  current CC1111 FW version

• updateFirmwareCC1111WithLastVersion

   void updateFirmwareCC1111WithLastVersion(GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with last version

  Parameters:

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call periodically with FW update progress status.

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• updateFirmwareCC1111WithLastVersion

   void updateFirmwareCC1111WithLastVersion(GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetProgressStatus cbOnFineProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with last version

  Parameters:

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call periodically with FW update progress status.

  cbOnFineProgress - Callback to call periodically with FW update progress status (one call per packet progress).

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• updateFirmwareCC1111WithVersion

  @Deprecated() void updateFirmwareCC1111WithVersion(FirmwareCC1111 fwCC1111, GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with given version. This method starts a background task to execute FW update. All callbacks are called from background task. Care must be taken to not update UI directly from the callbacks.

  Parameters:

  fwCC1111 - Object representing a PandwaRF CC1111 firmware.

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call periodically with FW update progress status.

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• updateFirmwareCC1111WithVersion

   void updateFirmwareCC1111WithVersion(FirmwareCC1111 fwCC1111, GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetProgressStatus cbOnFineProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with given version. This method starts a background task to execute FW update. All callbacks are called from background task. Care must be taken to not update UI directly from the callbacks.

  Parameters:

  fwCC1111 - Object representing a PandwaRF CC1111 firmware.

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call periodically with FW update progress status.

  cbOnFineProgress - Callback to call periodically with FW update progress status (one call per packet progress).

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• getLastVersionFirmwareNordic

   void getLastVersionFirmwareNordic(String modelName, String hardwareRevision, GollumCallbackGetString cb)

  Query the server for last available Nordic FW version for specified model/HW revision

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getLastVersionFirmwareNordic

   void getLastVersionFirmwareNordic(String modelName, String hardwareRevision, GollumCallbackGetGeneric<FirmwareNordic> cbFirmwareNordic)

  Query the server for last available Nordic FW for specified model/HW revision

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cbFirmwareNordic - Callback to call with FW object when the background task is terminated

• getCurrentFirmwareNordicId

   String getCurrentFirmwareNordicId()

  Get current Firmware Nordic Id

  Returns:

  the current Firmware Nordic Id

• updateFirmwareNordicWithLastVersion

   void updateFirmwareNordicWithLastVersion(boolean deviceInDfuMode, GollumCallback cbDownloadStarted, GollumCallback cbDownloadFinish, GollumCallback cbOnFinish, GollumCallbackGetProgress cbOnProgress)

  Update the Firmware Nordic with last version

  Parameters:

  deviceInDfuMode - Indicates if the targeted device will be already in DFU mode.

  cbDownloadStarted - callback to call when the firmware download has started

  cbDownloadFinish - Callback to call when the firmware download is terminated

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call when the FW update background task is in progress

• updateFirmwareNordicWithVersion

   void updateFirmwareNordicWithVersion(FirmwareNordic fwNordic, boolean deviceInDfuMode, GollumCallback cbDownloadStarted, GollumCallback cbDownloadFinish, GollumCallback cbOnFinish, GollumCallbackGetProgress cbOnProgress)

  To update Nordic firmware with a given version

  Parameters:

  fwNordic - Object representing a PandwaRF Nordic firmware.

  deviceInDfuMode - Indicates if the targeted device will be already in DFU mode.

  cbDownloadStarted - callback to call when the firmware download has started

  cbDownloadFinish - Callback to call when the firmware download is terminated

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call when the FW update background task is in progress

• updateFirmwareNordic

   void updateFirmwareNordic(String mFilePath, Uri mFileStreamUri, String mInitFilePath, Uri mInitFileStreamUri, boolean deviceInDfuMode, boolean keepBond, GollumCallback cbOnFinish, GollumCallbackGetProgress cbOnProgress)

  Start a Nordic FW update (DFU) procedure. If the URI and path are not null the URI will be used. Note: Always exit auto BLE reconnect mode to not interfere when switching to DFU. Use setAutoBleReconnectIfError

  Parameters:

  mFilePath - the path of the file (if null, mFileStreamUri must not be null)

  mFileStreamUri - the URI of the file (if null, mFilePath must not be null)

  mInitFilePath - the path of the init file - used only for DFU Bootloader version pre-0.5 (SDK 4.3, 6.0, 6.

  mInitFileStreamUri - the URI of the init file - used only for DFU Bootloader version pre-0.5 (SDK 4.3, 6.0, 6.

  deviceInDfuMode - Indicates if the targeted device will be already in DFU mode.

  keepBond - whether the bond information should be preserved in the new application.

  cbOnFinish - Callback to call when the FW update is finished.

  cbOnProgress - Callback to call when the FW update background task is in progress

• abortUpdateFwNordic

   void abortUpdateFwNordic()

  Abort DFU service if running.

• isFirmwareUpdateAvailable

   void isFirmwareUpdateAvailable(String modelName, String hardwareRevision, GollumCallback cbOnFinish)

  Check if a FW update (Nordic or CC1111) is available

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cbOnFinish - Callback to be called with the result of operation, when the background task is terminated.

• saveRollingCodeConfigInFlash

   void saveRollingCodeConfigInFlash(int codeWordSize, int numSameACodeToTransmit, int numSameBCodeToTransmit, int numCodeToTransmit, int codeFileSize, int numCodeInCodeFile, int nextCodeIndex, Array<byte> buffer, GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Parameters:

  codeWordSize - Size of Code Word.

  numSameACodeToTransmit - Number of A codes to be transmitted.

  numSameBCodeToTransmit - Number of B codes to be transmitted.

  numCodeToTransmit - Number of A+B codes to be transmitted.

  codeFileSize - Size of file in bytes.

  numCodeInCodeFile - Number of codes in file.

  nextCodeIndex - Index of next rolling code to use.

  buffer - Data buffer containing the codes to write.

  cbOnFinish - Callback to call when the writing in flash is finished.

  cbOnProgress - Callback to call when the writing in flash is in progress.

  cbOnPageTotalUpdate - Callback to call when the number of pages to write in flash is known.

• readRollingCodeConfigFromFlash

   void readRollingCodeConfigFromFlash(GollumCallbackGetGeneric<RollingCodeTxConfig> cbOnFinish)

  Reads a rolling code configuration from PandwaRF SPI Flash memory

  Parameters:

  cbOnFinish - Callback to call when the reading from flash is finished.

• getLibVersion

   String getLibVersion()

  Returns the version of Gollum Android Lib

  Returns:

  version of Gollum Android Lib

• getLibGitHash

   String getLibGitHash()

  Returns the commit Id of Gollum Android Lib

  Returns:

  commit Id of Gollum Android Lib

• getNrfToolboxLibVersion

   String getNrfToolboxLibVersion()

  Returns the version of nRF toolbox Android Lib

  Returns:

  version of nRF toolbox Android Lib

• getCurrentSoftwareVersion

   String getCurrentSoftwareVersion()

  Returns the the current Nordic software version

  Returns:

  the current Nordic software version

• getCurrentFirmwareVersion

   String getCurrentFirmwareVersion()

  Returns the the current CC1111 firmware version

  Returns:

  the current CC1111 firmware version

• getBatteryLevel

   void getBatteryLevel()

  Read the current battery level. Force a battery level request.

• getCurrentBleDeviceMacAddress

   String getCurrentBleDeviceMacAddress()

  Returns the current BLE device MAC address

  Returns:

  the device MAC address

• writeTXCharacteristic

   boolean writeTXCharacteristic(Array<byte> value, boolean useBleWriteWithAck)

  Write data on the Nordic UART Service (NUS) TX characteristic

  Parameters:

  value - data to write as a byte array.

  useBleWriteWithAck - True to perform a write with response (slower, but with ack), false to perform a write without response (faster, but no ack).

  Returns:

  True if write has been queued for transmission, false if something has gone wrong.

• writeNotifRXCharacteristic

   boolean writeNotifRXCharacteristic(boolean enabled)

  Enables/Disable Nordic UART Service (NUS) RX notification

  Parameters:

  enabled - Set to true to enable notifications/indications

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeNotifBusConfig

   boolean writeNotifBusConfig(boolean enable)

  Enables/Disable Nordic BUS service notification

  Parameters:

  enable - Set to true to enable notifications

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeResetNordic

   boolean writeResetNordic()

  Reset Nordic nRF51 chipset

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeForceSleepNordic

   boolean writeForceSleepNordic()

  Force Nordic nRF51 chipset to enter sleep mode

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeResetCC1111

   boolean writeResetCC1111()

  Reset Texas Instruments CC1111 chipset

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeRunSelfTest

  @Deprecated() boolean writeRunSelfTest()

  Force a PandwaRF self-test to be run (not implemented).

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeGetLastSelfTestResult

  @Deprecated() boolean writeGetLastSelfTestResult()

  Read the last self-test verdict (not implemented: use a read on BUS Config Characteristic 0x1527).

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• isBleConnected

   boolean isBleConnected()

  Returns:

  true if the Gollum is connected using BLE

• isUsbConnected

   boolean isUsbConnected()

  Returns:

  true if the Gollum is connected using USB

• isDeviceConnected

   boolean isDeviceConnected()

  Returns:

  true, if GollumRF is connected using BLE or USB

• isDeviceConnected

   boolean isDeviceConnected(String deviceAddress)

  Parameters:

  deviceAddress - address to check for connected status

  Returns:

  true, if GollumRF is connected using BLE or USB

• isPandwaRfRogue

   boolean isPandwaRfRogue()

  Returns:

  true if device (Nordic and CC1111) is a Rogue (Pro or Gov)

• isPandwaRfRogueNordic

   boolean isPandwaRfRogueNordic()

  Returns:

  true if device (Nordic) is a Rogue (Pro or Gov)

• isPandwaRfMarauder

   boolean isPandwaRfMarauder()

  Returns:

  true if device (Nordic + CC1111) is a Marauder

• isPandwaRfMarauderNordic

   boolean isPandwaRfMarauderNordic()

  Returns:

  true if device (Nordic) is a Marauder

• isRegisteredRogue

   void isRegisteredRogue(GollumCallbackGetBoolean cb)

  Ask the backend if the device is a registered Rogue and call the callback when information is available

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• writeMarauderStartStopRx

   boolean writeMarauderStartStopRx(boolean start)

  Start/Stop Marauder RX. Marauder only.

  Parameters:

  start - 0 to stop RX, 1 to start RX

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderStartStopRx

   boolean writeMarauderStartStopRx(Array<byte> data)

  Start/Stop Marauder RX. Marauder only.

  Parameters:

  data - Raw data to write to the Marauder config for Start/Stop RX command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderStartTx

   boolean writeMarauderStartTx(short sector, byte repeat)

  Start Marauder TX for a given sector. Marauder only.

  Parameters:

  sector - Sector to transmit.

  repeat - Sector will be transmitted repeat times

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderSetFreq

   boolean writeMarauderSetFreq(int frequency)

  Set the frequency to scan (Marauder). Marauder only.

  Parameters:

  frequency - Frequency in Hz

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderSetSamplingRate

   boolean writeMarauderSetSamplingRate(int samplingRate)

  Set the sampling rate to use (Marauder). Marauder only.

  Parameters:

  samplingRate - Sampling rate in bits/s

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderSetModulationDeviation

   boolean writeMarauderSetModulationDeviation(int modulation, int deviation)

  Set the modulation &deviation to use (Marauder). Marauder only.

  Parameters:

  modulation - The modulation value to use.

  deviation - Channel deviation, in Hz.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderSetChannelFilterBandwidth

   boolean writeMarauderSetChannelFilterBandwidth(int chanFilterBw)

  Set the Receiver Channel Filter Bandwidth (Marauder). Marauder only.

  Parameters:

  chanFilterBw - Receiver Channel Filter Bandwidth, in Hz.

• writeMarauderSetRxCompressionMode

   boolean writeMarauderSetRxCompressionMode(boolean enable)

  Enable/disable RX RLE encoding Marauder only.

  Parameters:

  enable - RX compression mode

• writeMarauderSetSectorCaptureTimeout

   boolean writeMarauderSetSectorCaptureTimeout(@IntRange(from = 0, to = 65000) int timeout)

  Parameters:

  timeout - Programmable timeout to store the next capture in a new sector, must be a multiple of 8.

• writeMarauderSetBleAdvertising

   boolean writeMarauderSetBleAdvertising(boolean enable)

  Enable/disable BLE advertising (Stealth BLE advertizing) Marauder only.

  Parameters:

  enable - true to enable advertising (normal mode), false to disable advertising (Stealth mode on)

• writeMarauderSetFreqFinderScanMode

   boolean writeMarauderSetFreqFinderScanMode(boolean scanMode)

  Determine the scanning mode used by FreqFinder before RX on Marauder Standard and Ultimate. Marauder Standard and Ultimate only.

  Parameters:

  scanMode - FreqFinder scanning mode.

• writeMarauderSetFreqBands

   boolean writeMarauderSetFreqBands(int bandsToScanBitMap)

  Set the frequencies to scan (Marauder). Marauder only.

  Parameters:

  bandsToScanBitMap - a bitmap of the bands to scan.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderEraseMemory

   boolean writeMarauderEraseMemory()

  Erase all sectors containing captured data. Marauder only.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderEraseSector

   boolean writeMarauderEraseSector(short sector)

  Erase specific sector containing captured data.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderPrepareReadSectorInfo

   boolean writeMarauderPrepareReadSectorInfo(short sector)

  Prepare next read with information for given sector. This info will read on next BLE read (Read request without authentification). Marauder only.

  Parameters:

  sector - Sector to read information from.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeEnqueueDelay

   boolean writeEnqueueDelay(int delayMs)

  Enqueue a delay into the BLE Request queue

  Returns:

  True if delay has been queued for request, false if something has gone wrong.

• writeMarauderPrepareReadSectorData

   boolean writeMarauderPrepareReadSectorData(short sector, byte page)

  Prepare next read with data for given sector. This info will read on next BLE read (Read request without authentification). Marauder only.

  Parameters:

  sector - Sector to read data from.

  page - Page to be prepared for read.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderPrepareReadStatusInfo

   boolean writeMarauderPrepareReadStatusInfo()

  Prepare next read with summary of all captured info. This info will read on next BLE read (Read request without authentification). Marauder only.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderPrepareReadSectorBitmap

   boolean writeMarauderPrepareReadSectorBitmap()

  Prepare next read with information for all sectors status in a bitmap. This info will be read on next BLE read (Read request without authentification). Marauder only.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderSetCurrentTime

   boolean writeMarauderSetCurrentTime(Date currentDate)

  Set the current date used as an offset for capture timestamps. Marauder only.

  Parameters:

  currentDate - Current date (number of milliseconds since the January 1, 1970, 00:00:00 GMT)

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• readMarauderNotification

   void readMarauderNotification()

  Ask to receive the status of Marauder notification.

• writeMarauderNotification

   boolean writeMarauderNotification(boolean enable)

  Activate the reception of Marauder notifications.

  Parameters:

  enable - Set to true to enable notifications/indications

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeMarauderRxRssiThreshold

   boolean writeMarauderRxRssiThreshold(int rxRssiThreshold)

  Write rx rssi threshold, 0 for disable it.

• readMarauderConfigChar

   boolean readMarauderConfigChar()

  Sends a Marauder Config Read (read request without authentification) to retrieve the last command result. This will trigger onMarauderConfigReceived() to be broadcasted with results of the previous write command. Content of characteristic read depends on previous Write command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• getMarauderStatusInfo

   boolean getMarauderStatusInfo()

  Write a marauderPrepareReadStatusInfo then launch a read

• getMarauderSectorBitmap

   boolean getMarauderSectorBitmap()

  Write a marauderPrepareReadSectorBitmap then launch a read

• getMarauderSectorInfo

   boolean getMarauderSectorInfo(short sector)

  Write a marauderPrepareReadStatusInfo then launch a read

• getMarauderSectorData

   boolean getMarauderSectorData(short sector, byte page)

  Write a marauderPrepareReadSectorData then launch a read

• getAllMarauderSectorData

   void getAllMarauderSectorData(short sector, byte startPage, byte endPage)

  Loop on sector data pages (Note : Page must be between [1, 15] )

• getAllMarauderSectorData

   void getAllMarauderSectorData(short sector)

  Loop on sector data pages (Note : Page must be between [1, 15] )

• startMarauderTx

   boolean startMarauderTx(short sector, byte repeat)

  Write a writeMarauderStartTx

  Parameters:

  sector - Sector to transmit.

  repeat - Sector will be transmitted repeat times

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• startMarauderTx

   boolean startMarauderTx(short sector)

  Write a writeMarauderStartTx

  Parameters:

  sector - Sector to transmit.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• startMarauderRx

   boolean startMarauderRx()

  Write a writeMarauderStartStopRx(true)

• stopMarauderRx

   boolean stopMarauderRx()

  Write a writeMarauderStartStopRx(false)

• eraseMarauderSector

   boolean eraseMarauderSector(short sector)

  Write a writeMarauderEraseSector

• eraseMarauderMemory

   boolean eraseMarauderMemory()

  Write a writeMarauderEraseMemory

• writeLoopBackMode

   boolean writeLoopBackMode(boolean enable)

  Set the LoopBack mode

  Parameters:

  enable - Set to true to enable notifications/indications

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeLoopBackMode

   boolean writeLoopBackMode(Array<byte> data)

  Set the LoopBack mode.

  Parameters:

  data - Raw data to write to the BUS config for loopback mode command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeAsyncMode

   boolean writeAsyncMode(Array<byte> data)

  Set Async mode.

  Parameters:

  data - Raw data to write to the BUS config for async mode.

• writeLockButtonsMode

   boolean writeLockButtonsMode(Array<byte> data)

• writeUsbMode

   boolean writeUsbMode(boolean mode)

  Enables/Disables the USB.

  Parameters:

  mode - True to enable USB, false to disable.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeUsbMode

   boolean writeUsbMode(Array<byte> data)

  Enables/Disables the USB.

  Parameters:

  data - Raw data to write to the BUS config for USB mode.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeTxRetryMode

   boolean writeTxRetryMode(boolean mode)

  Set the TX retry mode to retry a BLE transmission when no TX buffer is available.

  Parameters:

  mode - : false: no retransmission if TX failstrue: Retry TX when no TX buffer available

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeTxRetryMode

   boolean writeTxRetryMode(Array<byte> data)

  Set the TX retry mode to retry a BLE transmission when no TX buffer is available.

  Parameters:

  data - Raw data to write to the BUS config for TX retry mode.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeHwRevision

   boolean writeHwRevision(String hw_rev_code)

  Set the HW revision of dongle.

  Parameters:

  hw_rev_code - HW Revision Code to be written in PandwaRF memory.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeRxRssiThreshold

   int writeRxRssiThreshold(byte freqFinderRssiThreshold, byte rxRssiThreshold)

  Parameters:

  freqFinderRssiThreshold - signed 8 bits.

  rxRssiThreshold - signed 8 bits.

• writeHwRevision

   boolean writeHwRevision(Array<byte> data)

  Set the HW revision of dongle.

  Parameters:

  data - Raw data to write to the BUS config for HW revision command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeBatteryCapacity

   boolean writeBatteryCapacity(int capacity)

  Set the battery capacity of dongle

  Parameters:

  capacity - in mAh, 0 if no battery connected

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeDelayBeforePowerOff

   boolean writeDelayBeforePowerOff(int delay)

  Set delay before powering off PandwaRF HW

  Parameters:

  delay - in mn, 0 to disable auto power off.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeBleConnectionParamUpdate

   boolean writeBleConnectionParamUpdate(byte config)

• writeNotifButtonPushed

   boolean writeNotifButtonPushed(boolean enable)

  Activate the receipt of notifications when a button is pushed on the board.

  Parameters:

  enable - Set to true to enable notifications/indications

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• readDeviceInformation

   void readDeviceInformation()

  Ask information about the current device

• getLastVersionCC1111

   void getLastVersionCC1111(String modelName, String hardwareRevision, GollumCallbackGetString cb)

  Query the server for last available CC1111 FW version for specified model/HW revision

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getLastVersionNordic

   void getLastVersionNordic(String modelName, String hardwareRevision, GollumCallbackGetString cb)

  Query the server for last available Nordic FW version for specified model/HW revision

  Parameters:

  modelName - model name of the PandwaRF to check

  hardwareRevision - HW revision of the PandwaRF to check

  cb - Callback to call when the background task is terminated

• writeStateLed

   boolean writeStateLed(int led, boolean state)

  Set the state of a led.

  Parameters:

  led - LED Id.

  state - True for LED on, false for LED off.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeStateLed

   boolean writeStateLed(Array<byte> value)

  Set the state of a led.

  Parameters:

  value - Raw data to write to the BUS config for LED command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeButtonPush

   boolean writeButtonPush(int button)

  Simulate the push on a button on the board using the BLE BUS Service and BUS push button characteristic.

  Equivalent to execButton

  Parameters:

  button - Id of the button.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeButtonPush

   boolean writeButtonPush(Array<byte> data)

  Simulate the push on a button on the board.

  Parameters:

  data - Raw data to write to the BUS config for button push command.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• writeDeviceName

   boolean writeDeviceName(String deviceName)

  Write PandwaRF advertizing name and device name.

  Parameters:

  deviceName - New PandwaRF device advertizing name.

  Returns:

  True if write has been queued for request, false if something has gone wrong.

• readNotifButtonPushed

   void readNotifButtonPushed()

  Ask to receive the status of Button Pushed notification.

• readNotifBattery

   void readNotifBattery()

  Ask to receive the status of Battery notification.

• readBusConfig

   void readBusConfig()

  Ask to receive the status of the last PandwaRF Power On Self Test. This will trigger BUS Config read and onBusConfigReceived() will be broadcasted with POST results.

• readBleErrorsFirstErrorAndResetIndex

   void readBleErrorsFirstErrorAndResetIndex()

  Send a read request to read first BLE error from dongle memory This will trigger a read received and next read requests will then be sent

• deleteBleErrorsFromGollum

   void deleteBleErrorsFromGollum()

  Send a write request to erase all BLE errors from dongle memory

• backendInitialize

   void backendInitialize(Context context, boolean offlineModeBackend, boolean offlineModeAnalytics, boolean offlineModeCrashReport)

  Parameters:

  offlineModeBackend - true to force the lib to enter specified network mode (offline/online) for backend managing FW versions, BLE errors, database, etc...

  offlineModeAnalytics - true to force the lib to enter specified network mode (offline/online) for logging and analytics backend, false to allow connection

  offlineModeCrashReport - true to force the lib to enter specified network mode (offline/online) for logging events and app crashes, false to allow connection

• getLastAppVersionCodeAvailableFromParseServer

   void getLastAppVersionCodeAvailableFromParseServer(GollumCallbackGetInteger cb)

  Return last available application version code from Parse server

  Parameters:

  cb - callback with last available versionCode result

• closeGollumUsbDevice

   void closeGollumUsbDevice()

  Close the USB device

• getCurrentTrxMode

   int getCurrentTrxMode()

  Returns the current trx mode (USB or BLE)

  Returns:

  current trx mode: {@value #GOLLUM_MODE_USB} or {@value #GOLLUM_MODE_BLE}

• onDestroyCalled

   static void onDestroyCalled(Context context)

  Close all device connection. Shall be called in your activity onDestroyCalled() method. Remove the instance of GollumDongle.

• reconnect

   void reconnect(String address)

  Reconnect to a given BLE address, or last BLE address used if address is null. Use after a pause(). Call this function if you want to resume BLE background connection

  Parameters:

  address - BLE device address to reconnect to.

• reconnectUSB

   boolean reconnectUSB()

  Reconnect to a USB device. Use after a pause(). Call this function if you want to resume USB connection

  Returns:

  true if USB device found and connected, false if no USB device found

• pause

   void pause()

  Pause PandwaRF connection. Shall be called in your activity onPause() method if you don't want to keep BLE background connection Warning: Do not call onPauseUSB() if connected in USB Warning: app onPause() is called in many occasions, sometime even if the app remains in foreground (event, dialog open, multi-window mode, ...) ! To avoid side effects leading to GollumDongle being paused/resumed/paused/etc... onPauseUSB() shall not be called if USB mode is used

• signalRssi

  @Deprecated() void signalRssi(boolean enable)

  Activate or deactivate RSSI signal measurement.

  Parameters:

  enable - Set to true to enable RSSI signal measurement.

• signalBattery

  @Deprecated() void signalBattery(boolean enable)

  Activate or deactivate battery level reception.

  Parameters:

  enable - Set to true to enable battery level reception.

• notifButtonPushed

  @Deprecated() void notifButtonPushed(boolean active)

  Enable notification when a button is pressed on the device.

  Parameters:

  active - Set to true to enable notifications/indications

• openGollumUsbDevice

   void openGollumUsbDevice(UsbDevice device)

  Connect with an USB device.

  Parameters:

  device - USB device open.

• usbScan

   UsbDevice usbScan()

  Search for a supported USB device

  Returns:

  the UsbDevice if a device has been found, null if no USB device found.

• usbScanAndOpen

   UsbDevice usbScanAndOpen(boolean connectWhenFound)

  Search for a supported USB device and connect to it if required by parameter. If connectWhenFound is false, scan for supported device and return teh UsbDevice found.

  Parameters:

  connectWhenFound - true to connect to UsbDevice when found, false to scan only

  Returns:

  the UsbDevice if a device has been found (and potentially connected to), null if no USB device found.

• getUsbDevice

   UsbDevice getUsbDevice()

  Returns current UsbDevice of connected device (if any)

  Returns:

  UsbDevice

• getUsbFileDesc

   int getUsbFileDesc()

  Returns current USB file descriptor of connected device (if any)

  Returns:

  USB file descriptor

• getUsbDeviceName

   String getUsbDeviceName()

  Returns current USB device name of connected device (if any)

  Returns:

  USB device name

• rfOpen

   void rfOpen(int fileDesc, GollumCallbackGetInteger cb)

  Open RF link

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfClose

   void rfClose(int fileDesc, GollumCallbackGetInteger cb)

  Close RF link

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfReconnect

   void rfReconnect(GollumCallbackGetBoolean cb)

  Close and re-open RF link and NPI packet interface. Aka Nuke and Rebuild For USB, uses the current file descriptor

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - returns true if a NPI interface was closed, false if nothing was done

• rfStopAll

   void rfStopAll()

  Stop all rf actions. WARNING: do not used it with Marauder.

• flushMsgQueue

   void flushMsgQueue(int fileDesc, GollumCallbackGetInteger cb)

  Clear the incoming NPI message queue

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• hardResetChip

   void hardResetChip(int fileDesc, GollumCallbackGetInteger cb)

  Order the CC1111 chip to do a power off/power on sequence of the CC1111 using RESETn

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setRfConfigPredefined

   void setRfConfigPredefined(int fileDesc, int config, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  config - Preddefined configuration Id

  cb - Callback to be called with the result of operation, when the background task is terminated.

• isBusy

   void isBusy(GollumCallbackGetBoolean cb)

  Ask MACSTATE register value

  Returns:

  positive value is the current state of the FW, negative value in case of error.

• rfGetStatus

   void rfGetStatus(GollumCallbackGetInteger cb)

  Ask MACSTATE register value

  Returns:

  positive value is the current state of the FW, negative value in case of error.

• setFrequency

   int setFrequency(int fileDesc, int frequency)

  Set the RX/TX operating frequency of PandwaRF. Warning: some API calls that require frequency as parameter can override this value. Must be called from background thread, as this method does NOT creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  frequency - The frequency to use in Hz

  Returns:

  0 if success, negative value if an error occured

• setFrequency

   void setFrequency(int fileDesc, int frequency, GollumCallbackGetInteger cb)

  Set the RX/TX operating frequency of PandwaRF. Warning: some API calls that require frequency as parameter can override this value. Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  frequency - The frequency to use in Hz

  cb - Callback to be called with the result of operation, when the background task is terminated.

• computeFrequencyOffsetCorrection

   int computeFrequencyOffsetCorrection(int frequency)

  Correct the RX/TX operating frequency of PandwaRF. Used to correct the effect of the Synthesizer frequency tolerance (Typ. +/- 40 ppm). Synthesizer frequency tolerance is given by crystal used. Required accuracy (including temperature and aging) depends on frequency band and channel bandwidth / spacing.

  Parameters:

  frequency - The frequency to apply offset correstion in Hz

  Returns:

  corrected frequency in Hz

• rfJammingStart

   void rfJammingStart(int fileDesc, int startFrequency, int stopFrequency, int dataRate, int modulation, GollumCallbackGetInteger cb)

  Start RF jamming

  Warning: calling this method causes the CC1111 to reset, in order to start Jamming with clean parameters. All RF parameters set prior to this method call will be lost.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue Gov and Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  startFrequency - The start Frequency to use in Hz

  stopFrequency - The stop Frequency to use in Hz

  dataRate - Target data rate, in bits/s.

  modulation - The modulation value to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfJammingStop

   void rfJammingStop(int fileDesc, GollumCallbackGetInteger cb)

  Stop RF jamming

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue Gov and Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackSetup

   void rfBruteForceAttackSetup(int fileDesc, RfSetupParameters rfSetupParam, BruteForceSetupParameters bfSetupParam, GollumCallbackGetInteger cb)

  Setup the Brute Force. Requires a Brute Force Start SyncCodeTail to start the BF.

  Warning: calling this method causes the CC1111 to reset, in order to start BF with clean parameters. All RF parameters set prior to this method call will be lost.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  rfSetupParam - Radio parameters to use.

  bfSetupParam - Brute Force parameters to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackSetupLongSymbol

   void rfBruteForceAttackSetupLongSymbol(int fileDesc, RfSetupParameters rfSetupParam, BruteForceSetupLongSymbolParameters bfSetupParam, GollumCallbackGetInteger cb)

  Setup the Brute Force with long symbols Requires a Brute Force Start SyncCodeTail to start the BF

  Warning: calling this method causes the CC1111 to reset, in order to start BF with clean parameters. All RF parameters set prior to this method call will be lost.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue Gov variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  rfSetupParam - Radio parameters to use.

  bfSetupParam - Brute Force parameters to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackSetupFunction

   void rfBruteForceAttackSetupFunction(int fileDesc, String functionMask, String functionValue, GollumCallbackGetInteger cb)

  Brute Force setup of the Function Mask and Value. Optional after a Brute Force Setup and before Brute Force Start SyncCodeTail to start the BF

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  functionMask - This is like a Mask IP Address.

  functionValue - This is the "contrary" of functionMask.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackStart

   void rfBruteForceAttackStart(int fileDesc, RfSetupParameters rfSetupParam, BruteForceStartParameters bfStartParam, GollumCallbackGetInteger cb)

  All in one message to start a Brute Force Public version

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  rfSetupParam - Radio parameters to use.

  bfStartParam - Brute Force parameters to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackStartSyncCodeTail

   void rfBruteForceAttackStartSyncCodeTail(int fileDesc, BruteForceStartSyncCodeTailParameters bfSctParam, GollumCallbackGetInteger cb)

  Start a Brute Force using previous parameters set in Setup Brute Force message Requires a call to rfBruteForceAttackSetup() before

  Only available in Rogue Gov variant

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue Gov variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  bfSctParam - Brute Force parameters to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackStop

   void rfBruteForceAttackStop(int fileDesc, GollumCallbackGetInteger cb)

  Stop the Brute Force attack

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfSetTxRxPowerAmp

   int rfSetTxRxPowerAmp(int fileDesc, Common.RfPowerAmplifierMode powerMode)

  Set power Amplifiers mode, assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  powerMode - cf.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfSetTxRxPowerAmp

   int rfSetTxRxPowerAmp(int fileDesc, int actionToPerform)

  Set power Amplifiers mode, assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  actionToPerform - Power amplifier mode

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfSetTxRxPowerAmp

   void rfSetTxRxPowerAmp(int fileDesc, Common.RfPowerAmplifierMode powerMode, GollumCallbackGetInteger cb)

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  powerMode - cf.

  cb - Callback to be called with the TX/RX power amplifier mode, when the background task is terminated.

• rfSetTxRxPowerAmp

   void rfSetTxRxPowerAmp(int fileDesc, int actionToPerform, GollumCallbackGetInteger cb)

  Set power Amplifiers mode Native call will be done inside background task. Callback is called once completed.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  actionToPerform - Power amplifier mode

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfGetTxRxPowerAmp

   int rfGetTxRxPowerAmp(int fileDesc)

  Get power Amplifiers mode, assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  Power amplifier mode on success, -1 in case of failure

• rfGetTxRxPowerAmp

   void rfGetTxRxPowerAmp(int fileDesc, GollumCallbackGetInteger cb)

  Get power Amplifiers mode Native call will be done inside background task. Callback is called once completed.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the TX/RX power amplifier mode, when the background task is terminated.

• rfBruteForceAttackGetStatusUpdate

   void rfBruteForceAttackGetStatusUpdate(int fileDesc, GollumCallbackGetGeneric<BruteForceAttackStatusUpdate> cb)

  Returns Brute Force status update value

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfBruteForceAttackGetStatusUpdate

   BruteForceAttackStatusUpdate rfBruteForceAttackGetStatusUpdate(int fileDesc)

  Returns Brute Force status update value, assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  0 if no Brute force status update message found, bruteForceStatus (32 bits) if success, -1 if brute force is finished

• setOutputPower

   void setOutputPower(int fileDesc, int power_dbm, GollumCallbackGetInteger cb)

  Sets 'standard' output power of CC1111

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  power_dbm - TX output power in dBm.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setBitRate

   void setBitRate(int fileDesc, int dataRate, GollumCallbackGetInteger cb)

  Set the TX/RX data rate to use for PandwaRF transmission/reception. Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  dataRate - TX/RX data rate to use for PandwaRF transmission/reception.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setModulation

   void setModulation(int fileDesc, int modulation, GollumCallbackGetInteger cb)

  Set the RX/TX operating modulation of PandwaRF. Warning: some API calls that require modulation as parameter can override this value. Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  modulation - The modulation value to use.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setFilterBandwidth

   void setFilterBandwidth(int fileDesc, int filter_bandwidth, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  filter_bandwidth - Receiver Channel Filter Bandwidth, in Hz.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• sendJsFile

   void sendJsFile(int fileDesc, String jsScript, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  jsScript - Path of JS file to execute.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rxFlush

   void rxFlush(int fileDesc, GollumCallbackGetInteger cb)

  Removes all RX messages already in queue

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txFlush

  @NonNull() int txFlush(int fileDesc)

  Removes all TX messages already in queue Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  number of TX messages destroyed, 0 if no message destroyed

• txFlush

   void txFlush(int fileDesc, GollumCallbackGetInteger cb)

  Removes all TX messages already in queue

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to call when the FW update is finished, with number of TX messages destroyed, 0 if no message destroyed

• rxFlush

  @NonNull() int rxFlush(int fileDesc)

  Removes all RX messages already in queue Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  number of RX messages destroyed, 0 if no message destroyed

• getTrxInfo

  @Deprecated() void getTrxInfo(int fileDesc, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• powerMeasStart

   void powerMeasStart(int fileDesc, int frequency, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  frequency - The frequency to use in Hz

  cb - Callback to be called with the result of operation, when the background task is terminated.

• powerMeasStop

   void powerMeasStop(int fileDesc, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfScanInContext

   int rfScanInContext()

  Make a rfScan, but assuming we are already in a background task Must be called from background thread

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfScan

   void rfScan(GollumCallbackGetInteger cb)

  Starts a rfScan in background task Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfSpecanStart

   int rfSpecanStart(int fileDesc, int basefreq, int chanspc, int numchan, int pkt_delay_ms)

  Starts Spectrum Analyzer in current Thread. Assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  basefreq - Start frequency in Hz (ex: 433920000)

  chanspc - frequency increment in Hz (ex: 25000 Hz)

  numchan - number of channels (ex: 51 channels)

  pkt_delay_ms - delay in ms between packets

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfSpecanStart

   void rfSpecanStart(int fileDesc, int basefreq, int chanspc, int numchan, int pkt_delay_ms, GollumCallbackGetInteger cb)

  Starts Spectrum Analyzer in background task

  Warning: calling this method causes the CC1111 to reset, in order to start BF with clean parameters. All RF parameters set prior to this method call will be lost.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  basefreq - Start frequency in Hz (ex: 433920000)

  chanspc - frequency increment in Hz (ex: 25000 Hz)

  numchan - number of channels (ex: 51 channels)

  pkt_delay_ms - delay in ms between packets

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfSpecanGetRssi

   int rfSpecanGetRssi(Array<byte> rssi_buffer, int size)

  Same as rfSpecanGetRssi, but assuming we are already in a background task Must be called from background thread

  Parameters:

  rssi_buffer - Buffer to store the RSSI values received from PandwaRF.

  size - Buffer size.

  Returns:

  Number of channel for which the RSSI has been read if operation successfully completed, 0 or -1 in case of error.

• rfSpecanGetRssi

   void rfSpecanGetRssi(Array<byte> rssi_buffer, int size, GollumCallbackGetInteger cb)

  Returns SpecAn RSSI measurements

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  rssi_buffer - Buffer to store the RSSI values received from PandwaRF.

  size - Buffer size.

  cb - Callback to be called with the result of operation, when the background task is terminated.Result of operation is number of channel for which the RSSI has been read if operation successfully completed, 0 or -1 in case of error.

• rfSpecanSetPktDelay

   void rfSpecanSetPktDelay(int fileDesc, int pkt_delay_ms, GollumCallbackGetInteger cb)

  Configure the delay between 2 Spectrum Analyzer packets

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  pkt_delay_ms - delay in ms between packets (max 255 ms)

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfSpecanStop

   void rfSpecanStop(int fileDesc, GollumCallbackGetInteger cb)

  Stop Spectrum Analyzer in background task

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfSpecanStop

   int rfSpecanStop(int fileDesc)

  Stop Spectrum Analyzer in current Thread. Assuming we are already in a background task Must be called from background thread

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfFreqFinderStart

   int rfFreqFinderStart(int fileDesc, int hint)

  Starts frequency finder

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  hint - (not used)

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfFreqFinderStop

   int rfFreqFinderStop(int fileDesc)

  Stop frequency finder in current Thread. Assuming we are already in a background task Must be called from background thread

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfFreqFinderGetResult

   int rfFreqFinderGetResult(int fileDesc)

  Get An Array Describing the results of FreqFinder Session, assuming we are already in a background task Must be called from background thread

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  frequency found if operation successfully completed, 0 if operation completed without finding anything, -1 if no FreqFinder result is fetched

• rfJammingDetectorStart

   int rfJammingDetectorStart(int fileDesc, int sensitivity)

  Start jamming detector

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  sensitivity - a value between 0 and 10, to denote Jamming Detector sensitivity to Jamming,the smallest this value is the more the signal has to be continuous to be considered as Jamming.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfJammingDetectorGetResult

   int rfJammingDetectorGetResult(int fileDesc)

  Get the Status of Jamming Detector, assuming we are already in a background task Must be called from background thread

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  0: no jamming, 1: jamming detected

• rfJammingDetectorStop

   int rfJammingDetectorStop(int fileDesc)

  Stop Jamming Detector in current Thread. Assuming we are already in a background task Must be called from background thread

  Only available in Meddler variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rfJammingReactiveStart

   int rfJammingReactiveStart(int fileDesc, byte bandsToScanBitMap)

  Start reactive jamming

  Only available in Meddler variants

  Parameters:

  bandsToScanBitMap - a bitmap of the bands to scan.

  Returns:

  0 if success, negative value if an error occured

• rfJammingReactiveStart

   int rfJammingReactiveStart(int fileDesc, Array<boolean> bandsToScan)

  Start reactive jamming

  Only available in Meddler variants

  Parameters:

  bandsToScan - an array of the bands to scan : 0=>315Mhz, 1=>433Mhz, 2=>868Mhz, 3=>915Mhztrue to scan, false to ignore

  Returns:

  0 if success, negative value if an error occured

• rfJammingReactiveStart

   void rfJammingReactiveStart(int fileDesc, byte bandsToScanBitMap, GollumCallbackGetInteger cb)

  Start reactive jamming

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Meddler variants

  Parameters:

  bandsToScanBitMap - a bitmap of the bands to scan

  Returns:

  0 if success, negative value if an error occured

• rfJammingReactiveStop

   int rfJammingReactiveStop(int fileDesc)

  Stop reactive jamming in current Thread. Assuming we are already in a background task Must be called from background thread

  Only available in Meddler variants

  Returns:

  0 if success, negative value if an error occured

• rfDeBruijnStart

   int rfDeBruijnStart(int fileDesc, int deBruijnOrder, boolean encoding, byte symbol_0, byte symbol_1)

  Start De Bruijn Brute Force Session

  Only available in Rogue variants

  Parameters:

  deBruijnOrder - order of De Bruijn generation algorithm

  encoding - Whether or not each bit should be encoded into a byte

  symbol_0 - If encoding is true, the byte to encode a bit 0 (ex: 0x00)

  symbol_1 - If encoding is true, the byte to encode a bit 1 (ex: 0xFF)

  Returns:

  0 if success, negative value if an error occured

• rfDeBruijnStop

   int rfDeBruijnStop(int fileDesc)

  Stop De Bruijn Brute Force in current Thread. Assuming we are already in a background task Must be called from background thread

  Only available in Rogue variants

  Returns:

  0 if success, negative value if an error occured

• rfDeBruijnStop

   void rfDeBruijnStop(int fileDesc, GollumCallbackGetInteger cb)

  Stop De Bruijn Brute Force in current Thread. Assuming we are already in a background task

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rfDeBruijnGetStatusUpdate

   DeBruijnStatusUpdate rfDeBruijnGetStatusUpdate(int fileDesc)

  Returns Brute Force status update value, assuming we are already in a background task Must be called from background thread

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  Returns:

  status of the DeBruijn attack

• setLed

  @Deprecated() void setLed(int led, boolean val, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  led - LED Id.

  val - True for LED on, false for LED off.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setCC1111Sleep

   void setCC1111Sleep(int mode, GollumCallbackGetInteger cb)

  Put CC1111 into sleep mode. Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  mode - CC1111 power sleep mode.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• updateFirmwareCC1111

   void updateFirmwareCC1111(String hexFilePath, GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetProgressStatus cbOnFineProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with given HEX file. This method starts a background task to execute FW update. All callbacks are called from background task. Care must be taken to not update UI directly from the callbacks.

  See updateFirmwareCC1111 for details.

  Parameters:

  hexFilePath - Path of CC1111 FW file in hex format.

  cbOnFinish - Callback to call when the background task is terminated.

  cbOnProgress - Callback to call periodically with FW update progress status (one call per page progress.

  cbOnFineProgress - Callback to call periodically with FW update progress status (one call per packet progress.

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• updateFirmwareCC1111

   void updateFirmwareCC1111(Array<byte> hexfile, GollumCallback cbOnFinish, GollumCallbackGetInteger cbOnProgress, GollumCallbackGetProgressStatus cbOnFineProgress, GollumCallbackGetInteger cbOnPageTotalUpdate)

  Update CC1111 firmware with given HEX file. This method starts a background task to execute FW update. All callbacks are called from background task. Care must be taken to not update UI directly from the callbacks.

  When called, the hex file is analyzed and callback cbOnPageTotalUpdate is called with total number of pages to be flashed (N). During FW update, cbOnProgress is called after each page is successfully written to CC1111. Pages generally range from 1 to N=30, but this may vary according to FW size.

  If cbOnFineProgress is not null, it is called once a BLE packet composing the page has been sent. The cbOnFineProgress is filled with total which is the total number of BLE packets needed to complete a frame (generally 55) and progress which is the number of the last transmitted packet.

  After the last page has been written, cbOnFinish is called.

  The complete sequence is the following:

  • cbOnPageTotalUpdate
  • cbOnProgress page: 1
  • cbOnFineProgress progress: 0, total: 55
  • cbOnFineProgress progress: 1, total: 55
  • cbOnFineProgress progress: 2, total: 55
  • cbOnFineProgress ...
  • cbOnFineProgress progress: 54, total: 55
  • cbOnProgress page: 2
  • cbOnFineProgress progress: 0, total: 55
  • cbOnFineProgress ...
  • cbOnFineProgress progress: 54, total: 55
  • ...
  • cbOnProgress page: N
  • cbOnFineProgress progress: 0, total: 55
  • cbOnFineProgress ...
  • cbOnFineProgress progress: 54, total: 55
  • cbOnFinish

  Parameters:

  hexfile - CC1111 FW file in hex format.

  cbOnFinish - Callback to call when the background task is terminated.

  cbOnProgress - Callback to call periodically with FW update progress status (one call per page progress.

  cbOnFineProgress - Callback to call periodically with FW update progress status (one call per packet progress.

  cbOnPageTotalUpdate - Callback to call with total number of pages to be flashed.

• getCc1111FirmwareVersion

   void getCc1111FirmwareVersion(GollumCallbackGetString cb)

  Returns the CC1111 FW version

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getCc1111BuildType

   String getCc1111BuildType()

  Get CC1111 FW build type Sync version (GollumRfBigRogueCCtl, GollumRfBigCCtl, ...)

  Returns:

  build_type

• getCc1111BuildType

   void getCc1111BuildType(GollumCallbackGetString cb)

  Get CC1111 FW build type (GollumRfBigRogueCCtl, GollumRfBigCCtl, ...)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getCc1111SerialNumber

   void getCc1111SerialNumber(GollumCallbackGetString cb)

  Get CC1111 FW Serial Number (S0123, K4567, ...)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getCc1111BootloaderVersion

   void getCc1111BootloaderVersion(int fileDesc, GollumCallbackGetInteger cb)

  Get CC1111 CCTL bootloader version string

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• runFirmware

  @Deprecated() void runFirmware(int fileDesc, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• runBootloader

  @Deprecated() void runBootloader(int fileDesc, GollumCallbackGetInteger cb)

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setNicEncodingMode

   int setNicEncodingMode(int fileDesc, boolean rxCompMode)

  Configure RX frame compression, assuming we are already in a background task Must be called from background thread

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  rxCompMode - If false, no compression.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• setNicEncodingMode

   void setNicEncodingMode(int fileDesc, boolean rxCompMode, GollumCallbackGetInteger cb)

  Configure RX frame compression. Native call will be done inside background task. Callback is called once completed.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  rxCompMode - If false, no compression.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setTxInfiniteMode

   int setTxInfiniteMode(int fileDesc, boolean infiniteMode, int infModeLength)

  Configure RF TX infinite mode (for RF air gap-less transmission). Aka TX FIFO enqueue mode, assuming we are already in a background task Must be called from background thread

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  infiniteMode - TX FIFO enqueue mode (true: enabled, false: disabled)

  infModeLength - Expected block size when entering Infinite mode, in bytes

  Returns:

  0 if operation successfully completed, -1 in case of error.

• setTxInfiniteMode

   void setTxInfiniteMode(int fileDesc, boolean infiniteMode, int infModeLength, GollumCallbackGetInteger cb)

  Configure RF TX infinite mode (for RF air gap-less transmission). Aka TX FIFO enqueue mode. Native call will be done inside background task. Callback is called once completed.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  infiniteMode - TX FIFO enqueue mode (true: enabled, false: disabled)

  infModeLength - Expected block size when entering Infinite mode, in bytes

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setRxInfiniteMode

   int setRxInfiniteMode(int fileDesc, boolean infiniteMode)

  Configure RF RX infinite mode (for RF air gap-less reception). Must be called from background thread

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  infiniteMode - RX infinite mode (true: enabled, false: disabled)

• setRxInfiniteMode

   void setRxInfiniteMode(int fileDesc, boolean infiniteMode, GollumCallbackGetInteger cb)

  Configure RF RX infinite mode (for RF air gap-less reception). Native call will be done inside background task. Callback is called once completed.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Only available in Rogue variants

  Parameters:

  fileDesc - File descriptor of PandwaRF device.

  infiniteMode - RX infinite mode (true: enabled, false: disabled)

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txSetup

   int txSetup(int frequency, int modulation, int dataRate, int deviation)

  Configure CC1111 radio before sending Tx message over radio interface Same as txSetup, but assuming we are already in a background task Must be called from background thread

  Parameters:

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  dataRate - Transmission data rate, in bits/s.

  deviation - Channel deviation, in Hz.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• txSetup

   void txSetup(int frequency, int modulation, int dataRate, int deviation, GollumCallbackGetInteger cb)

  Configure CC1111 radio before sending Tx message over radio interface

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  dataRate - Transmission data rate, in bits/s.

  deviation - Channel deviation, in Hz.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txSend

  @Deprecated() int txSend(Array<byte> buffer, int tx_size, boolean async, int repeat)

  Send data as a byte array in the form [0x41, 0x42, 0x30, 0x46, ...]. Same as txSend, but assuming we are already in a background task Must be called from background thread Method will block until completion, whether async is true or false. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer - as a byte array in the form [0x41, 0x42, 0x30, 0x46, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• txSend

   int txSend(String data, boolean async, int repeat, boolean compress)

  Send an hexadecimal String. Same as txSend, but assuming we are already in a background task Must be called from background thread. Method will block until completion, whether async is true or false. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  data - an hexadecimal String in the form "abcdef0123456789".

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  compress - If false, no compression requested.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• txSendHex

   int txSendHex(Array<byte> buffer_hex, int tx_size, boolean async, int repeat, boolean compress)

  Send data as an hex byte array. Can be sent to PandwaRF in this form. Same as txSend, but assuming we are already in a background task Must be called from background thread Method will block until completion, whether async is true or false. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer_hex - an hex byte array in the form [0xAB, 0x0F, 0x00, 0xFF, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  compress - If false, no compression requested.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• txSendHex

  @Deprecated() int txSendHex(Array<byte> buffer_hex, int tx_size, boolean async, int repeat)

  Send data as an hex byte array. Can be sent to PandwaRF in this form. Same as txSend, but assuming we are already in a background task Must be called from background thread Method will block until completion, whether async is true or false. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer_hex - an hex byte array in the form [0xAB, 0x0F, 0x00, 0xFF, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• txSend

   void txSend(String data, boolean async, int repeat, boolean compress, GollumCallbackGetInteger cb)

  Send an hexadecimal String.

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Method will return immediatly after background task is created. Use cb callback to be notified when background thread completes. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  data - an hexadecimal String in the form "abcdef0123456789".

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  compress - If false, no compression requested.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txSend

  @Deprecated() void txSend(Array<byte> buffer, int tx_size, boolean async, int repeat, GollumCallbackGetInteger cb)

  Send data as a byte array in the form [0x41, 0x42, 0x30, 0x46, ...].

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Method will return immediatly after background task is created. Use cb callback to be notified when background thread completes. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer - as a byte array in the form [0x41, 0x42, 0x30, 0x46, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txSendHex

   void txSendHex(Array<byte> buffer_hex, int tx_size, boolean async, int repeat, boolean compress, GollumCallbackGetInteger cb)

  Send data as an hex byte array. Can be sent to PandwaRF in this form.

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Method will return immediatly after background task is created. Use cb callback to be notified when background thread completes. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer_hex - an hex byte array in the form [0xAB, 0x0F, 0x00, 0xFF, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  compress - If false, no compression requested.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• txSendHex

  @Deprecated() void txSendHex(Array<byte> buffer_hex, int tx_size, boolean async, int repeat, GollumCallbackGetInteger cb)

  Send data as an hex byte array. Can be sent to PandwaRF in this form.

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Method will return immediatly after background task is created. Use cb callback to be notified when background thread completes. If buffer contains too much data vs what is possible for the device variant (PandwaRF or Rogue), the data will truncated before sending.

  Parameters:

  buffer_hex - an hex byte array in the form [0xAB, 0x0F, 0x00, 0xFF, ...].

  tx_size - Not used.

  async - true to send in async mode (doesn't wait for ack from PandwaRF), false to send in sync mode (wait for PandwaRF ack)

  repeat - number of SW or HW repeat times: 1 = single TX, 2 = 2 TX, etc.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rxSetup

   int rxSetup(int frequency, int modulation, int dataRate, int frameLength, int chanbw, int deviation, boolean asyncMode)

  Same as rxSetup, but assuming we are already in a background task Must be called from background thread

  Parameters:

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  dataRate - Sampling rate, in Hz

  frameLength - Size (in bytes) of the packet that the CC1111 transceiver needs to capture before sending it to Android

  chanbw - Receiver Channel Filter Bandwidth, in Hz.

  deviation - Channel deviation, in Hz.

  asyncMode - indicates if async mode (collected data as pulse width) is enabled.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rxSetup

   void rxSetup(int frequency, int modulation, int dataRate, int frameLength, int chanbw, int deviation, boolean asyncMode, GollumCallbackGetInteger cb)

  Configure Dongle for RX.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  dataRate - Sampling rate, in Hz

  frameLength - Size (in bytes) of the packet that the CC1111 transceiver needs to capture before sending it to Android

  chanbw - Receiver Channel Filter Bandwidth in Hz

  deviation - Channel deviation, in Hz.

  asyncMode - indicates if async mode (collected data as pulse width) is enabled.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rxListen

   int rxListen(Array<byte> buffer, int rx_size)

  Start listening for RX data. Same as rxListen, but assuming we are already in a background task. Must be called from background thread

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rx_size - Size of RX data buffer.

  Returns:

  Captured data size, 0 if operation successfully completed without data, -1 in case of error.

• rxListen

   Array<byte> rxListen(Array<byte> buffer, boolean rxCompMode, boolean remainingData)

  Start listening for RX data. Same as rxListen, but assuming we are already in a background task. Must be called from background thread

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rxCompMode - If true, search for RX frame with compression.

  remainingData - true to read the un-transmitted data (data not big enough to fill a RfCat frame), false to read normal frames

  Returns:

  Captured data array, empty array if operation successfully completed without data, null in case of error.if rxCompMode is set to true, setNicEncodingMode must have been called previously to enable RX frame compression.

• rxListen

   Array<byte> rxListen(Array<byte> buffer, boolean rxCompMode)

  Start listening for RX data. Same as rxListen, but assuming we are already in a background task. Must be called from background thread

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rxCompMode - If true, search for RX frame with compression.

  Returns:

  Captured data array, empty array if operation successfully completed without data, null in case of error.if rxCompMode is set to true, setNicEncodingMode must have been called previously to enable RX frame compression.

• rxListen

   void rxListen(Array<byte> buffer, int rx_size, GollumCallbackGetInteger cb)

  Start listening for RX data. Must be called after rxSetup It creates a background task so do not call from background task.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rx_size - Size of RX data buffer.

  cb - Callback to be called with the result of operation, when the background task is terminated.Callback contains result with captured data size, 0 if operation successfully completed without data, -1 in case of error.

• rxListen

   int rxListen(Array<byte> buffer, int rx_size, boolean rxCompMode, boolean remainingData)

  Start listening for RX data. Same as rxListen, but assuming we are already in a background task. Must be called from background thread

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rx_size - Size of RX data buffer.

  rxCompMode - If true, search for RX frame with compression.

  remainingData - true to read the un-transmitted data (data not big enough to fill a RfCat frame), false to read normal frames

  Returns:

  Captured data size, 0 if operation successfully completed without data, -1 in case of error.if rxCompMode is set to true, setNicEncodingMode must have been called previously to enable RX frame compression.

• rxListen

   int rxListen(Array<byte> buffer, int rx_size, boolean rxCompMode)

  Start listening for RX data. Same as rxListen, but assuming we are already in a background task. Must be called from background thread

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rx_size - Size of RX data buffer.

  rxCompMode - If true, search for RX frame with compression.

  Returns:

  Captured data size, 0 if operation successfully completed without data, -1 in case of error.if rxCompMode is set to true, setNicEncodingMode must have been called previously to enable RX frame compression.

• rxListen

   void rxListen(Array<byte> buffer, int rx_size, boolean rxCompMode, GollumCallbackGetInteger cb)

  Start listening for RX data. Must be called after rxSetup It creates a background task so do not call from background task.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  buffer - Empty RX data buffer where data will be stored.

  rx_size - Size of RX data buffer.

  rxCompMode - If true, search for RX frame with compression.

  cb - Callback to be called with the result of operation, when the background task is terminated.Callback contains result with captured data size, 0 if operation successfully completed without data, -1 in case of error.

• rxAsyncListen

   int rxAsyncListen(Array<byte> buffer)

  Listen rx data as pulse width. Given buffer will be filled by native library. Must be called after call of rxSetup. Must be called from background thread.

• rxStop

   int rxStop()

  Stop RX data reception. Can be called from background task. Same as rxStop, but assuming we are already in a background task

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rxStop

   void rxStop(GollumCallbackGetInteger cb)

  Stop RX data reception. It creates a background task so do not call from background task.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• rxDataRateMeasStart

   int rxDataRateMeasStart(int frequency, int modulation, int dataRate, int chanbw, int deviation, int threshold_occ_winner)

  Measure data rate, assuming we are already in a background task Must be called from background thread

  Parameters:

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  dataRate - Sampling rate, in Hz.

  chanbw - Receiver Channel Filter Bandwidth, in Hz.

  deviation - Channel deviation, in Hz.

  threshold_occ_winner - Number of occurence needed for a duration to be elected as the winner.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rxDataRateMeasStop

   int rxDataRateMeasStop()

  Same as rxDataRateMeasStop, but assuming we are already in a background task Must be called from background thread

  Returns:

  0 if operation successfully completed, -1 in case of error.

• rxDataRateMeasListen

   int rxDataRateMeasListen(boolean searchEndMsg)

  Periodicaly read for dara rate measurement results. Must be called from background thread.

  Parameters:

  searchEndMsg - true to search for SYS_CMD_NIC_DATARATE_DETECTED_ENDfalse to search for SYS_CMD_NIC_DATARATE_DETECTED

  Returns:

  vaue of measured data rate if operation successfully completed, 0 if no DRM result found, -1 if DRM measurement is finished.

• keeloq_enc

  @Deprecated() int keeloq_enc(Array<byte> key, Array<byte> plaintext, GollumCallbackGetByteArray cb)

  Perform Keeloq encoding

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  key - Keeloq device key.

  plaintext - Data to encrypt.

  cb - Callback to be called with the result of operation, when the background task is terminated.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• keeloq_dec

  @Deprecated() int keeloq_dec(Array<byte> key, Array<byte> ciphertext, GollumCallbackGetByteArray cb)

  Perform Keeloq decoding

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  key - Keeloq device key.

  ciphertext - Data to decrypt.

  cb - Callback to be called with the result of operation, when the background task is terminated.

  Returns:

  0 if operation successfully completed, -1 in case of error.

• saveButtonConfigInFlash

   void saveButtonConfigInFlash(int button, int frequency, int modulation, int deviation, int dataRate, int power_amp, Array<byte> buffer, GollumCallbackGetInteger cb)

  Save a RF configuration into a physical button of the device.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  button - Id of the button.

  frequency - The frequency to use, in Hz.

  modulation - The modulation value to use.

  deviation - The deviation :)

  dataRate - Transmission data rate, in bits/s.

  buffer - Data to be transmitted when button is pushed.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• execButton

  @Deprecated() void execButton(int button, GollumCallbackGetInteger cb)

  Execute the same action as physically pressing a button on the device by sending a APP_FLASH_MEMORY/CMD_FM_EXEC_CONFIG message to nRF51.

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Equivalent to writeButtonPush

  Parameters:

  button - Id of the button.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• isDongleModeBootloader

   boolean isDongleModeBootloader()

  Indicates if dongle bootloader is running. Can be called from background task.

  Returns:

  true if device is in bootloader mode

• isDongleModeFirmware

   boolean isDongleModeFirmware()

  Indicates if dongle firmware is running. Can be called from background task.

  Returns:

  true if device is in firmware mode

• isDongleModeBootloader

   void isDongleModeBootloader(GollumCallbackGetBoolean cb)

  Indicates if dongle bootloader is running. It creates a background task so do not call from background task.

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Use isDongleModeBootloader instead if calling from background task already

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• isDongleModeFirmware

   void isDongleModeFirmware(GollumCallbackGetBoolean cb)

  Indicates if dongle firmware is running. It creates a background task so do not call from background task.

  Must NOT be called from background thread, as this method already creates its own AsyncTask. Use isDongleModeFirmware instead if calling from background task already

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getRfTestList

   void getRfTestList(Array<byte> rfTestList, GollumCallbackGetInteger cb)

  Return list of available RF self tests No need for dongle to be connected so we dont pre-check connection

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  rfTestList - Array to store the available RF test list.

  cb - Callback to be called with the result of operation, when the background task is terminated.

• runRfTest

   void runRfTest(int test, GollumCallbackGetInteger cb)

  Run CC1111 RF test

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  test - Number of test to run

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getNativeLibVersion

   void getNativeLibVersion(GollumCallbackGetString cb)

  Returns Gollum Native Lib version

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• getNativeLibusbVersion

   void getNativeLibusbVersion(GollumCallbackGetString cb)

  Returns version of libusb

  Must NOT be called from background thread, as this method already creates its own AsyncTask.

  Parameters:

  cb - Callback to be called with the result of operation, when the background task is terminated.

• setNativeNpiTimeout

   void setNativeNpiTimeout(int syncDhBleTimeOutMs, int syncDhUsbTimeOutMs, int rxThreadTimeoutMs, GollumCallbackGetInteger cb)

  Set values for different timeouts used in Gollum Native Lib.

  Parameters:

  syncDhBleTimeOutMs - Timeout value for Gollum Native Stack when connected in BLE.

  syncDhUsbTimeOutMs - Timeout value for Gollum Native Stack when connected in USB.

  rxThreadTimeoutMs - Timeout value for Gollum Native Stack when looking for an asynchronous message in NPI queue.

  cb - Callback to be called with the result of operation, when the background task is terminated.